Lumenier general Mini led breakout board

Lumenier universal Mini led adapter board is becoming more and more popular. The LED branch board has one input (ground, 5V, signal) and four arm led pads (ground, 5V, signal input, signal output). The LED branch board also provides a set of additional pads as output to add other LED boards (any RGB LED board that runs at 5V and uses a typical RGB LED signal). As part of the lumenier LED lighting system, the universal micro led adapter board can be easily installed in the common flight controller installation mode (30.5mm x 30.5mm) and 5V. The power supply and required signals are distributed to four arm led boards (sold separately).

A movable mounting hole is arranged on the corner of the board. You can choose to use mounting holes or break each ear to shrink the board and install with tape.

We recommend that you cover the pad with insulating tape (e.g. electrical tape or liquid electrical tape).

Technical index：

• Length: 36 mm (ear length 24 mm)
• Width: 36 mm (27 mm without ears)
• Weight: 2G
• 1.6mm thick PCB
• Easy distribution of power and signals to digital RBG LEDs

Include：

• 1 universal Mini led breakout board
• 1 x 1×3 pin connector
• 1 x 7cm male to male servo cable

Lumenier Multi-function RGB LED System