Tel: +86 0755 85241496     E-mail:

PCB News

BT PCB – The Heart Of The Electronic Industry

There is no doubt that the PCB is one of the very critical parts of the electronic industry. It is the acronym used for the printed circuit board that is in every electronic device. The advent of the PCB has made it possible to see so many more compact devices with functionalities that would have been impossible in earlier times. Gone are the days of bulky devices. They were not only difficult to carry but lacked the features as well. Today, in a single main PCB, you can pack so many diodes, resistors and the like that you can transform any device to perform many times its potential. Thanks to the main PCB and other types of PCBs like the BT PCB, you are able to use so many electronic products across industries and at costs that are affordable. The size of modern devices has shrunk in size, thanks to PCBs.

BT PCB – The Heart Of The Electronic Industry
BT PCB – The Heart Of The Electronic Industry

Like with any other product, you need companies that make the PCB. These companies have been able to make use of special epoxy and copper layers to create PCB types of single to multi layers. The complexity and utility of the PCB is directly proportional to the layering of the PCBs. These layers are very thin and that is how the electronic devices produced are so light, thin and easy to carry, without any compromise on the features that product can deliver.

PCBs Are Mass Produced Normally And Tested For Quality

PCBs can be mass produced using computer aided machinery. That is why the intricate soldering and wiring of the PCBs can be so precise. For instance, the cavity PCB features cavities to enable reduction of the component height and for more clearances. While they can also be made by hand, there would be a definite limitation in the type of PCB that would be ultimately produced. These would not be as complicated or as intricate as the ones made using sophisticated computer-based technology.

There are companies that also mass produce PCBs customized to meet specific needs of customers. They are costlier but fulfil requirements that the customers need for their products that deliver a particular feature. The company which requests for such PCBs needs them for that competitive edge in the market over others.

As a customer seeking to get PCBs made by a company, you need to be sure about the quality control aspects. Since the PCB is such an important component of any device, PCB testing is essential so that the final product is of superior quality. An inferior product can make you lose customers and market share. Click here to find out more about PCBs and how they are produced and tested,

How do Main and Other Type PCBs Function?

The PCBs, whether they are Main, Rogers, Cavity or BT types all function by helping to power up the device. The PCB is the platform or base that serves to make connections of various components and the electrical elements inside the device possible. The PCB ensures that the device is able to work as per the design by enabling electrical current to flow correctly to all the components. Different devices have different PCB configurations and tuning mechanics. Usually a prototype is initially made and tested to make sure it is working as per the requirement before mass production is done.

It is a process which starts with the design team understanding the functioning of the device and what the client is expecting. The initial prototypes are made based on this specs from the client, tested and then the next steps are taken. It is likely the process gets repeated before the final product is duly approved by the client. The design strategies over the years have undergone multiple changes but the broad framework remains the same.

3 Step Process

The 3 steps are first to create schematic diagram for the main PCB and Rogers PCBs, then the board design and finally the printing and production of the Cavity PCB or BT PCB.

Selecting the right designers and makers of the PCBs is a very important aspect that should not be ignored. You should look for a long-term business relationship that is based on trust and proven credentials. Look for companies that have experience of designing and making main PCBs across industries so that you get the benefit of their knowledge. There may be certain nuances of the Cavity PCB or the BT PCB that they may be aware of, due to their experience and such knowledge is a priceless one.

Such companies may not charge you a bomb for the prototype. They need to be convinced that you are in for a long-term association and they would be benefitted working with you. A lot of course depends on the products you intend to sell in the marketplace. Best selling and quick selling devices are obviously the preferred ones that any manufacturer would like to work with as they would be assured of consistent orders.

As a company engaged in making the best of electronic devices, you want to concentrate on the core business. Most businesses do that and prefer to outsource other aspects of their business. So, when it comes to the design, fabrication, testing and production of the main PCBs, Rogers PCBs or Cavity PCBs, you should look for a good outsourcing partner.

As mentioned above, the search for such a partner becomes crucial as you need to be able to depend on this partner for all your current and future PCB requirements. You may not initially concentrate or focus too much on the pricing as it is essential to develop a working relationship. Over time, as you and this partner work together and a trust develops between the two of you, there might be scope for working out better commercial terms.

The PCB is finding its place amongst so many modern devices that it is impossible to ignore. Also, one can never underestimate the importance of a good and quality PCB since it has multipurpose uses.



Leave a Reply

Leave a message